Electronics / Audio / Machining
Pages
(Move to ...)
Electronics Projects
Audio Projects
Machining Projects
▼
Wednesday, January 13, 2021
Digital Readout (DRO) for mini lathe using cheap digital calipers
›
Digital calipers can be used as an inexpensive alternative to a commercially available DRO for home workshop machine tools. Many hobbyists a...
Friday, June 19, 2020
DC Motor Controller Circuit using Triac Dimmer
›
This circuit has been designed for use with 200VDC motors, such as those found in treadmills. It uses a cheap triac motor control...
Homemade Milling Machine
›
This milling machine is the result of years of tinkering in the home workshop, and is built mostly from scrap materials at low cost. This pr...
Mini Lathe
›
A 7x12" mini lathe is an excellent addition to the home workshop. With some patience it can produce parts to a high standard. As with m...
Tuesday, October 4, 2016
SMD Beak
›
An SMD Beak is used to hold a surface mount device in place as you solder it, leaving both of your hands free to hold your iron and sold...
Tools for the Electronics Tradesman
›
As with any trade, purchasing the right tools for a job in the electronics industry is essential. Here I have listed the tools that I beli...
Thursday, April 21, 2016
Speaker Impedance Measurement
›
Comparing two speakers side by side is the best way diagnose a fault, but it's likely you will not always be able to do this. Speake...
›
Home
View web version