Monday, December 9, 2013

FAB Pedal Multi Effects

This analogue multi effect unit can be made from Danelectro FAB pedals 

Danelectro FAB pedals can be sourced cheaply on ebay. Other parts include press button switches, LEDs, 6.5mm mono jacks, and some hot melt glue.
Aluminium sheet was cut to size and squared, then marked and drilled for each of the existing pots on the circuit boards. Press button switches, jacks and power was also drilled.

Each circuit board was fixed to the face plate with hot melt glue, then each pedal wired in a chain (output to input of next...).
Tinned copper wire was used for the ground connections, to give some rigidity to the rear circuit boards.

Plywood box was made to suit.